This cable routing method is in line with Chinese electrical standards and is intended for power cables routed through conduits.

Parameter 1 is used to define the maximum number of cables that can be auto-routed through conduit, and is set to 1 to define single cable.

Parameter 2 and Parameter 3 are intended to define voltage level that will be used as a routing filter.

The default configuration (Parameter 1 = LV and Parameter 2 = MV ) has following meaning:

If voltage level of both cable and conduit is LV or MV and the Single Cable in Conduit cable laying method is applied to the conduit, only single cable can be auto-routed through that conduit.

Maximum conduit fill factor is defined in the Raceway Router (the value in the Max Capacity field)

When defining overrides for the Single cable in conduit method, Parameter 3 is optional, which means this cable routing method is applicable to Single Voltage Level ONLY.

See example below for LV: